Drive in pallet racking, high density storage, storage system

Name: Drive in pallet racking

Website: njracking.com

Drive-In pallet rack, also called drive through pallet rack, is used where high-density storage is required.   It is frequently used in facilities with a low number of product lines.   Pallets are stored in a block system with two blocks generally served by one operating aisle.
The trucks drive into the racking to load or retrieve pallets, which   are stored on cantilevered rails running throughout the storage system. The   first pallet in is the last one out FILO (First in, Last Out ) unless a Drive-Through system is used whereby pallets can be loaded or retrieved from either side.
·High density storage allowing a greater number of pallets to be stored per cubic metre than other storage system.
·Low stock rotation suitable for seasonal goods and fluctuating stock demand.
·Ideal for cold and chill storage and bulk storage applications.
·Suitable for easily damaged or fragile loads,which cannot be block stacked.
Forklift trucks drive into lanes on racking specially built to provide support to the pallet along the pallet sides.
Stacking   often to 10 meters high and 4 or 5 but occasionally even more than 10   deep. This system can provide very dense storage capacity, often low in   access and rotation of products. As the truck enters the racking,   special precautions apply to ensure the compatibility of design between   the truck, pallet and load and the racking. Flat floors are   advantageous.
Usually the rack design incorporates a stability   structure at the rear of the rack and therefore drive in indicates   single access from one side. Drive through requires this same stability   to be provided by a variation in design. www.njracking.com